The machine is made by coupling double-sided from 32+32 to 40+40 seats. The coupling can be either in length or width. Mould pieces are twice as viable as a mould of a WC is followed by a bride mould. If you plan to apply a dryer, you should create a set of coupled machines in length. For economy, the coupling length allows you to reuse the demoulders at multiple benchs, conveniently staggered times casting. The moulds are closed horizontally and vertically by bracing.
The module consists of::
- Supporting bench mould tilted hydraulically
- System of lower frames for supporting the mould on the lower bench
- Demoulder for pistons of clamp with manual handling facilitated by counterweights
- Demoulder for pieces automatic type with electric motors and actuators driven by an inverter (LEM) allows the extraction and rotation of the mould
- Special sucker active for the posting of the bride and exact re positioning of the pieces just processed with the interposition of a special mixture gluing.
- Casting plant using PVC piping, valves and power distribution layer stainless steel tanks and accessories for use (taps, probes etc.).
- Empty plant with side channel blowers and adjustable pressure valve.
- Electric control panel, protection and control cycle casting.
Deposit Bench
Equipped with plans sliding wear and heat distribution pipes (on request).
Dryers (see overview)
The dryer is available upon request, can be mounted on the machine to make a daily double casting. Includes the distribution system under the deposit bench.
Permitted Uses
Casting of toilets and bidets with foot or suspended, after the preparation of moulds suitable for mounting the chassis and lock with key lock between the pieces. Recommended for pieces of major series in which the value added is given by dripping rim perfectly realized. There is the need for plugs for undercut.
Limits
Requires good manual dexterity and considerable skill in laying the adhesive modelling must take into account the point of junction to maximize its invisibility.