These machines are used for casting wash basins and other pieces with moulds divided into two parts. The machine is achieved by coupling online forms by 60 seats (different quantity on request). Coupling can take place either in length or width. If you plan to apply a dryer, you should create a battery of machines coupled in length. For economy, the coupling length allows to reuse demoulder on multiple counters, staggered appropriately casting time. The moulds are closed horizontally to the parcel.
The module consists of:
- Support bench moulds to variable inclination with two fixed push heads and track for sliding bogies;
- Oil-pressure device of inclination bench with cylinders.
- Movable units equipped with a release system from fixing on the bench;
- Oleo-dynamic pressures mounted on the moving heads, each consisting of four cylinders with the oscillating head adaptive and relative pressurization pump.
- Truck for the furniture in equal in number to moulds assembled;
- Demoulder, heavy type, power-driven, sliding inside bench with oil-pressure operation and anti-topple mould system, “plateau” block and detachment piece.
- Casting plant using PVC pipes, supply and distribution valves, stainless steel tank and accessories to use (taps, probes etc.).
- Discharge plant with side channel/s blowers and adjustable pressure relief valve/s.
- Electrical system with switchboard, protection and control casting cycle; it has an inverter to make sure and fluid demoulder movements.
- Under-mould blow system composed by a centrifugal fan and an inflatable flex hole hose.
- All safety devices provided by the most stringent existing standards and manuals on.
Deposit bench
It is mounted frontally on each bench, in one or double floor, the latter for systems with dryer. In this last case it is to predict a easy roller change plan pneumatic. Featuring with slipping plans and heat distribution pipes (on request).
Demoulder device Mini Ulysses
As the machine demoulding on flat, two people only to transfer the piece to the deposit are enough. If you want to avoid the second person, using the simple demoulder device Mini Ulysses type, the lifting operation on the desired floor and replacing the piece is fully automatic and can be performed by a single operator who has the supervisor role, in addition to that, in any case, to realize the necessary work on the piece just demoulded (technical realization holes, removing burrs, etc...)
Dryer (see overview)
The dryer is available on request, can be placed on the machine to achieve a double casting daily. Generally a blow for undermould is enough, included, to realize the second casting. Dryer need only if the slip is very particular and need long time.
Permitted Uses
Casting of large wash basins/showers, columns, in any shape with high quality requirements.